Nermin Posted January 17, 2016 Share Posted January 17, 2016 This is important as I have lots of customers from England. Is there a way to set up so if someone is from another country shipping will be changed based on their location instead of charging only 5.00 for flat rate to all. To send a flat rate from USA is 25.00 Quote Link to comment Share on other sites More sharing options...
bsmither Posted January 17, 2016 Share Posted January 17, 2016 With both the USPS module and the ALL-In-One-Shipping module, each being able to apply charges to specific countries, you should be able to get the combination you want.Also, the above image of the checkout screen shows estimated shipping and tax. CubeCart uses the calculations from enabled shippers that are from your store being shipped to your store.CC609 now has an admin setting to switch this estimate off. Quote Link to comment Share on other sites More sharing options...
Nermin Posted January 17, 2016 Author Share Posted January 17, 2016 (edited) Can someone from Europe try to add item in the cart to see if it will change. I did and it does select correct shipping for USA All good now I have removed the link Edited January 17, 2016 by Nermin Quote Link to comment Share on other sites More sharing options...
bsmither Posted January 17, 2016 Share Posted January 17, 2016 You can pretend to be a customer and create a customer account -- choose for a billing/delivery address someplace in Europe. There is no check against IP addresses.Once logged in as a customer with a delivery address in Europe, CubeCart will show correct calculations for shipping and taxes. Quote Link to comment Share on other sites More sharing options...
Nermin Posted January 17, 2016 Author Share Posted January 17, 2016 (edited) You can pretend to be a customer and create a customer account -- choose for a billing/delivery address someplace in Europe. There is no check against IP addresses.Once logged in as a customer with a delivery address in Europe, CubeCart will show correct calculations for shipping and taxes.Yes!! it works... Well now all important things are set right. Did I say Damn I love CubeCart Edited January 17, 2016 by Nermin Quote Link to comment Share on other sites More sharing options...
Nermin Posted January 17, 2016 Author Share Posted January 17, 2016 Only USPS not working or not showing up at all and request log reads:\ Request Sent - http://production.shippingapis.com/ShippingAPI.dll API=RateV4&XML=<RateV4Request USERID="portablebosna"> <Package ID="0"> <Service>ALL</Service> <ZipOrigination>46825</ZipOrigination> <ZipDestination>46825</ZipDestination> <Pounds>2</Pounds> <Ounces>0</Ounces> <Container>VARIABLE</Container> <Size>REGULAR</Size> <Machinable>False</Machinable> <ReturnLocations>TRUE</ReturnLocations> </Package> </RateV4Request> Response received <?xml version="1.0" encoding="UTF-8"?> <Error><Number>80040B1A</Number><Description>Authorization failure. Perhaps username and/or password is incorrect.</Description><Source>USPSCOM::DoAuth</Source></Error> Quote Link to comment Share on other sites More sharing options...
bsmither Posted January 17, 2016 Share Posted January 17, 2016 Please confirm you have created a USPS Merchant account, and also a separate account to use the USPS Webtools.Once you get registered to use the webtools, you will get an email like the one that follows:From: [email protected] Subject: Important USPS Web Tool Registration Notice ***** Please DO NOT REPLY to this automated message. Contact information is provided below. ***** Thank you for registering for the U. S. Postal Service's Web Tools Application Program Interfaces (APIs). We are providing you with a User ID that serves multiple purposes, as explained below. Your Username is 999AAAAA9999 Your Password is RANDOMALPHANUM Your Web Tools User ID, shown above, is required to test and integrate USPS Web Tools APIs. With this ID, you may begin sending calls to the test server. When you have completed your testing, email the USPS Internet Customer Care Center (ICCC). They will switch your profile to allow you access to the production server and will provide you with the production URLs.The merchant account username is NOT what you enter into CubeCart's USPS Shipping module settings screen. Quote Link to comment Share on other sites More sharing options...
Nermin Posted January 17, 2016 Author Share Posted January 17, 2016 (edited) Please confirm you have created a USPS Merchant account, and also a separate account to use the USPS Webtools.Once you get registered to use the webtools, you will get an email like the one that follows:From: registration@shippingapis.com Subject: Important USPS Web Tool Registration Notice ***** Please DO NOT REPLY to this automated message. Contact information is provided below. ***** Thank you for registering for the U. S. Postal Service's Web Tools Application Program Interfaces (APIs). We are providing you with a User ID that serves multiple purposes, as explained below. Your Username is 999AAAAA9999 Your Password is RANDOMALPHANUM Your Web Tools User ID, shown above, is required to test and integrate USPS Web Tools APIs. With this ID, you may begin sending calls to the test server. When you have completed your testing, email the USPS Internet Customer Care Center (ICCC). They will switch your profile to allow you access to the production server and will provide you with the production URLs.The merchant account username is NOT what you enter into CubeCart's USPS Shipping module settings screen.Ok got it working now and its all good Edited January 17, 2016 by Nermin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.